In the scale you must make sure that the continuous sending modes are disabled when using multiple scales we recommend that you configure the setting mode to “button only” or “button + stable”. Once the scale has been configured you may run Procell or Communication when using Procell to collect data into 3rd party software such as Word Pad open Procell once for every scale connected to the PC.

An example if you have three scales connected Procell must be opened 3 times. Each Procell application opened must be configured to read data from the connected scale. An example if scale number one has a comport of 14, and scale number two has a comport of 15, one Procell application must be configured to 14 and the other to 15. Always make sure that the baud rate in the scale is set to the same baud rate that is selected in Communications or Procell.